35 Güte- und Prüfbestimmungen Quality and Test Specifications The Quality Control Association of Waste and Recycling Containers (Gütegemeinschaft Abfall- und Wertstoffbehälter e. V.) Test report for 4-wheeled AWB-DU plastic With flat lid K Manufacturer: Mold-Nr. body: Initial test = EP Erstprüfung ○ Date of manufacture: Mold-Nr. lid: Internal monitoring = Eigenüberwachung EÜ ○ Material: Wheel: External test = Fremdüberwachung FÜ ○ Colour: Tester / Date: Quality and test requiremens according to Name of the test Name of the test Actual value EP EÜ FÜ Prüfresultat Comments7) i. O. n. i. O. Appearance and workmanship X X1)2) X ○ ○ DIN EN 840-5 4.2.1 3.3.2 Container dimensions X ○ ○ see data sheet 3.3.2 Test dimensions X4) X ○ ○ see data sheet 3.3.2 Chip nest X ○ ○ 3.3.2 Deformation of the frontal receiver X X1) X ○ ○ 3.3.3 Volume X ○ ○ 3.3.5 Dimensions of the body ≤ ± 1,5 % X X4) X ○ ○ 3.3.6 Warm storage X X3) ○ ○ 3.3.7 Wetting agent test X X3) X ○ ○ 3.3.8 Fall test X X3) X ○ ○ T1 3.3.9 Drop fall test X X3) X ○ ○ T2 3.3.10 Tilting ability X ○ ○ 3.3.11 Lid test X ○ ○ Flat lid 3.3.12 Locking system safety X X4) X ○ ○ 3.3.13 Stability – static ≥ 12° X ○ ○ 3.3.15 “Kerb travel” test X ○ ○ DIN EN 840-5 4.7.4 3.3.16 Brake test X X4) ○ ○ DIN EN 840-5 4.9.4 3.3.17 Wheel run, diameter of wheel 0 / –5 mm X6) ○ ○ DIN EN 840-5 4.9.3 3.3.14 Kerb fall test X ○ ○ DIN EN 840-5 4.7.5 3.3.15 Lateral impact on inclined plane X ○ ○ DIN EN 840-5 4.7.3 Pulling tests 285 N / 300 N X ○ ○ DIN EN 840-5 4.9.2 Test for handles X ○ ○ DIN EN 840-5 4.11.2 Weathering X5) ○ ○ DIN EN 840-5 4.11.4 Safety requirements X ○ ○ DIN EN 840-6 5 Marking and labelling X X4) X ○ ○ 1) Once per shift and per day 2) Colour test only after batch change 3) Once a week 4) Once per manufacturing period and per week 5) Certificate from an external testing institute or manufacturer 6) Certificate of the wheel manufacturer 7) The required test specifications must be taken from DIN EN 840 or DIN 30760.
RkJQdWJsaXNoZXIy MjIwNjU=