29 Güte- und Prüfbestimmungen Quality and Test Specifications 7 Enclosures 7.1 Test reports – 2-wheeled AWB, 4-wheeled AWB, 2-wheeled AWB-DU, 4-wheeled AWB-DU The Quality Control Association of Waste and Recycling Containers (Gütegemeinschaft Abfall- und Wertstoffbehälter e. V.) Test report for 2-wheeled AWB plastic K Manufacturer: Mold-Nr. body: Initial test = EP Erstprüfung ○ Date of manufacture: Mold-Nr. lid: Internal monitoring = Eigenüberwachung EÜ ○ Material: Wheel: External test = Fremdüberwachung FÜ ○ Colour: Tester / Date: Quality and test requirements according to Name of the test Set point Actual value EP EÜ FÜ Test result Comments7) Pass Fail Appearance and workmanship X X1)2) X ○ ○ DIN EN 840-5 4.2.1 3.3.2 Functional dimensions X ○ ○ DIN EN 840-1 3.3.2 Test dimensions X4) X ○ ○ 3.3.2 / 3.3.19 Chip nest X X ○ ○ 3.3.2 Deformation of the frontal receiver ≤ 1 % X X1) X ○ ○ 3.3.3 Volume X ○ ○ 3.3.5 Dimensions of the body ≤ ± 1,5 % X X4) X ○ ○ 3.3.6 Warm storage X X3) ○ ○ 3.3.7 Wetting agent test X X3) X ○ ○ DIN EN 840-5 4.11.1 3.3.8 Fall test X X3) X ○ ○ T2atEP 3.3.9 Drop ball test X X3) X ○ ○ T2, DIN EN 840-5 4.7.2 3.3.10 Tilting ability X ○ ○ DIN EN 840-5 4.10.2 3.3.11 Lid test X ○ ○ 3.3.13 Stability – static ≥ 12° X ○ ○ 3.3.17 Wheel run, diameter of wheel 0 / –5 mm X6) ○ ○ DIN EN 840-5 4.9.3 3.3.18 Angle expansion test X ○ ○ 3.3.14 Kerb fall test X ○ ○ DIN EN 840-5 4.7.5 Pulling tests 60 N / 300 N X ○ ○ DIN EN 840-5 4.9.2 Weathering X5) ○ ○ DIN EN 840-5 4.11.4 Safety requirements X ○ ○ DIN EN 840-6 5 Marking and labelling X X4) X ○ ○ 1) Once per shift and per day 2) Colour test only after batch change 3) Once a week 4) Once per manufacturing period and per week 5) Certificate from an external testing institute or manufacturer 6) Certificate of the wheel manufacturer 7) The required test specifications must be taken from DIN EN 840.
RkJQdWJsaXNoZXIy MjIwNjU=